| |
One-packed (in readiness for use) structural adhesive based on rubber-modified epoxy resins. The material is characterized by low viscosity. This enables to applicate it with suringe-machine, spattle, brush, stenciling method, robotics, at present the adhesive is used for the manufacture of honeycomb constructions, glass plastic honeycomb constructions, hybrid glass plastics as well as cutting and polishing tools.
Also, the adhesive has found a wide application for bindering of magnets in stators and rotors of electric motors, binding of ceramic inserts in fuses, binding of dissimilar substrates (glass plastic + copper or steel tips and others), binding of difficult-to-weld and difficult-to-solder metals and alloys (the fabrication of tube-type and plate-type heat exchangers; radiators of copper, brass and duraluminium; cylinder blocks), recovery of bearing mounting seats the manufacture and installation of sensors, electric motors etc.
Of special note is the results of application UP-5-240-1 adhesive in producing filter elements, which safe their workability under pressures in lubricant systems up to 200 atm. and temperatures up to 200 0C. |
| |
One-packed (in readiness for use) structure adhesive characterized by low viscosity. This allows to apply it with syringe-machine, spattle, brush, stenciling method, robotizes.
Cured adhesive is characterized by:
- high strength and seal characteristics;
- sealing of adhesive joint;
- resistance to cyclic loads, thermocycling and others;
- resistance to oils, freons, fuel-lubricant materials, water, most of organic solvents.
|
|
