Adhesives
One-packed fast-curing adhesives
Adhesives based on epoxy resins containing solvent systems, rheology additives, adhesion promoters, curing system:
 |
have high cure rate (10-40 min) at moderate temperatures (120-150°С);
provide adhesive joint of high strength characteristics;
show resistance to: nonuniform load, repeated temperature differences, moisture, vibration, biological factors, oils, freons, solvent;
|
 |
allows to automate binding process; can be applicated with spattle or brush, extrusion gun, stenciling method, imprint method;
certain adhesive marks are characterized by a combination of tixotropic properties with relative low viscosity and high flow rate through extrusion gun;
|
 |
- certain marks are capable of binding greasy metals, providing their corrosion protection even under failure of adhesive joint;
- they are capable of giving sealed high-strength adhesive joints.
|
|
|
Low-viscous one-packed adhesives
|
| |
One-packed (in readiness for use) structural adhesive based on rubber-modified epoxy resins. The material is characterized by low viscosity. This enables to applicate it with suringe-machine, spattle, brush, stenciling method, robotics, at present the adhesive is used for the manufacture of honeycomb constructions, glass plastic honeycomb constructions, hybrid glass plastics as well as cutting and polishing tools.
Also, the adhesive has found a wide application for bindering of magnets in stators and rotors of electric motors, binding of ceramic inserts in fuses, binding of dissimilar substrates (glass plastic + copper or steel tips and others), binding of difficult-to-weld and difficult-to-solder metals and alloys (the fabrication of tube-type and plate-type heat exchangers; radiators of copper, brass and duraluminium; cylinder blocks), recovery of bearing mounting seats the manufacture and installation of sensors, electric motors etc.
Of special note is the results of application UP-5-240-1 adhesive in producing filter elements, which safe their workability under pressures in lubricant systems up to 200 atm. and temperatures up to 200 0C. |
| |
One-packed (in readiness for use) structure adhesive characterized by low viscosity. This allows to apply it with syringe-machine, spattle, brush, stenciling method, robotizes.
Cured adhesive is characterized by:
- high strength and seal characteristics;
- sealing of adhesive joint;
- resistance to cyclic loads, thermocycling and others;
- resistance to oils, freons, fuel-lubricant materials, water, most of organic solvents.
|
|
Heat-resistant adhesives
|
| |
One-packed (in readiness for use) structural adhesive sealant is characterized by high strength characteristies at temperatures up to 250 oС, good heat-resistance and adhesion to materials used in microelectronics.
Cured adhesive is characterized by:
- high strength characteristics at temperatures up to 250oС;
- good heat-resistance;
- sealing of adhesive joint;
- resistance to cyclic loads, thermocycling and other.
|
|
Structural one-packed adhesives
|
| |
One-packed (in readiness for use) structure adhesive-sealant based on epoxy resins modified by rubber. The adhesive combines tixotropic properties and a possibility to regulate viscosity on customer’s requirement (depending on the way of application). The material is applied with guns of Grako type, stenciling method spattle, brush.
It was developed on the technical task and was used in public joint-stock company “Auto-VAZ” in the manufacture of aluminium car bodies. |
| |
One-packed (in readiness for use) structure adhesive-sealant of enhanced heat-resistance. The adhesive combines tixotropic properties and a possibility to regulate viscosity on customer’s demand (depending on the way of application).
The material is usually applied with guns of Grako type, stenciling method; may be applied with spittle or brush.
It was developed on the technical task and was used in public joint-stock company “Auto-VAZ” before the robotics was introduced on the conveyor for corrosion protection and sealing of adhesive-welded joints in perimeter flange of doors, bonnets, luggage compartments in cars “VAZ”, “ZAZ”, “RAF”, “AZLK”, “GAZ”.
At present this adhesive is used for the binding in hard-alloy inserts in the fabrication of cutting tool (cutting tools, mills, counter-bore tools, hones etc.). The adhesive has also found its application for bindering of magnets in stators and rotors of electric motors, binding of ceramic inserts in fuses, binding of dissimilar substrates (glass plastic + copper or steel tips and others), binding of difficult-to-weld and difficult-to-solder metals and alloys (the manufacture of tube and plate-type) heat, exchangers, radiators of copper, brass and duraluminium; cylinder blocks, recovery of bearing mounting seats, the manufacture and installation of sensors, electric motors etc.
The adhesive is also used for the fabrication of rotation ports for vans. There is an experience of gluing of babbit slider bearings, in compressor equipment. There were developed and used recovery technologies for shaft necks, shaft mounting seats, spline shafts, pinion shafts. |
| |
One-packed (in readiness for use) structure adhesive-sealant combining possibility to be applied with a gun of Grako type, spattle, brush, stenciling method, roboties, with no flowing on the vertical surface.
It is designed for corrosion protection and sealing of adhesive-welded joints of perimeter flange of doors, bonnets, luggage compartments in cars “VAZ”, “ZAZ”, “RAF”, “AZLK”. It is used for the binding of glass plastic honeycomb structures, binding of diamond crystals, for the manufacture of polishing tools, glueing of electromagnets in stators electric motors, sealing of voltage regulators, for the fabrication of the resistors with fuses, the repair of large-dimension electric motors in thermo-electric plants, the manufacture of filters for fuel-injection motor-cars, the manufacture of tube-and plate-type heat exchangers, radiators of ferrous and non-ferrous metals, binding tenso-sensors and flow sensors, the repair of cylinder blocks and other parts (from non-ferrous alloys), wgere soldering and welding is possible. |
| |
One-packed (ready-to-use) structural adhesive sealant combining a possibility of applying with the use of syringe-machine spattle, brush, stenciling method with no flowing on vertical surface.
It is designed for binding and sealing of suction plastic silencers for refrigerator’s compressors. Glues and seals polystyrol, ABS-plastic. In quality values, the adhesive is highly competitive with EP-106, EP-107, EP-109 adhesives of similar purposes, of the “Senadain k.k.” firm. |
|
Current conductive adhesives
|
| UP-5-201 |
Conductive adhesive is designed to fasten diode semiconductor large integrating circuits into body or on substrate, also providing earth. |
| UP-16-04 |
It is designed for automatic placing of a large integration micro circuits on glass-textolite and other substrates to provide electrical contact. |
| UP-5-201e |
It is designed to fasten diode semiconductor large integrating circuits into body or on a substrate where earth is not needed. |
1 - 10 из 11
Начало | Пред. | 1 2 | След. | Конец | Все
|
|
